SIMPL WINDOWS NAME: BlueBridge Level Control

MANUFACTURER: Atlas Sound
MODEL: TSD-BB22, TSD-BB44, BB-88, BB-816, BB-168,  BB-1616,  
       BB-88DT, BB-816DT, BB-168DT,  BB-1616DT

CATEGORY: Mixer

VERSION: 1.0

SUMMARY: This module will control a Level(Gain/Fader) 
	 on a BlueBridge DSP device.  

Communication:  TCP/IP, UDP/IP or RS-232
TCP port used:		10001
UDP port used:		10002	(Not Tested)
UDP_METER port used:	10003	(Unsolicited feedback, Not Tested)


VENDOR SETUP: 	Most Level Controls that is are in a BlueBridge design may be
		controled.  The Control Parameters for each control can be found under
		Component Properties by holding the CTRL key and clicking on desired control 

INPUT DESCRIPTIONS: 
Name               Type Description
Fader_Up/Down        D  Press / Press and hold to ramp the fader.
Poll                 D  Pulse to poll the current state of Fader.
                        This should only be necessary on start up or
                        when a preset is selected. It should not be
                        necessary to pulse this input with an oscillator.                     
From_Device$         S  Serial signal to be routed from the TCP/IP Client, UDP/IP symbol,

PARAMETER DESCRIPTIONS: 
Name              Type  Description
Connection Type      P  Type of Control Connecton to Atlas BlueBridge.
Crestron Mac Address P  Proccessor Mac Address Can be left as default x00\x00\x00\x00\x00\x00. 
Atlas Mac Address    P  Mac Address of DSP the control is programed in.
Type of Module       P  8 character string Located under Control Parameters in BlueBridge Designer.
Module Type Number   P  decimal value Located under Control Parameters in BlueBridge Designer.
Parameter ID         P  decimal value Located under Control Parameters in BlueBridge Designer.
Module Number	     P  decimal value Located under Control Parameters in BlueBridge Designer.
Channel ID 	     P  decimal value Located under Control Parameters in BlueBridge Designer.
Aux ID      	     P  decimal value Located under Control Parameters in BlueBridge Designer.
Ramp Time	     P  Time to ramp from 0 to 100%.
Upper Limit	     P	Upper Limit of Fader control 100d = 10.0db
Lower Limit	     P 	Lower Limit of Fader control -1000d = -100.0db



OUTPUT DESCRIPTIONS: 
Name               Type Description

Fader_Level_Bar      A  Analog signal to be routed to a bar graph on a touch panel.
To_Device$           S  Serial signal to be routed to TCP/IP Client, UDP/IP symbol
                       
REVISION HISTORY: rev 1.0